SCAN & FILE PREPARATION
DOCUTECH - BLACK & WHITE
Scan images at twice the lines-per-inch (lpi) being used for final output. at 170 dpt. Do not exceed 200 dpi. Convert images to 8-bit grayscale.
SMALL FORMAT COLOR
For small format color output scan images at 200 dpi.
LARGE FORMAT COLOR
For large format color, scan images at 100 dpi at final size. To calculate your scanning dpi use the following formula:
height + width {of final output} x 100 =
scan dpi height + width {of original}
Example: Final is 32" x 40".
Original is 8" x 10"
32" + 40" = 72"
-------------------- = 4 x 100 = 400 dpi
8" + 10" = 18"
GRAPHIC FILE SETUP
1. For color output save as single page EPS files. Send all original files including placed images.
2. Save Docutech jobs as multiple page Postscript files.
3. Send a laser proof with your job.
4. Before saving your file TURN OFF all color management software (CMS).
CAD PLOTTING
FILE SETUP
Send files as HPGL2 or Calcomp plot files. To receive configuration chart please call 818.500.0225.
1. Send scale, size and pen weights. Please do not send .PCP files. For information please call.
2. Send scale, size and pen weights. Please do not send .PCP files.
TIP
If sending .DWG files send any special fonts, scale, pen weights and all X-REFS. This information is very important in order to ensure correct output. Other Formats accepted for systems that don't support Drawing or Plot file. For information please call (213) 745-3145.
